X1 The anti-drop sensor is covered with dust.
2022-04-16
Model | X1 | |
Malfunction phenomenon | The anti-drop sensor is covered with dust. | |
Troubleshooting | 1. Turn DEEBOT over and wipe the anti-drop sensor to prevent dust cover. (Note: When turn the robot over, please put down gently) 2.Shut down and restart. | |
Maintenance Plan | 1.Use the Android phone camera function to shoot anti-drop sensor to check its signal. 2.Replace the defective anti-drop sensor module. 3.If the camera illuminates one side and the anti-drop sensor is not bright, please replace the anti-drop sensor of this side. 4.Use a mustimeter to measure the corresponding components of the mainboard, and cross-replace the mainboard to test. | |