X1 Do not vacuum
2022-04-16
Model | X1 (D-TOF/3D obstacle avoidance) | |
Malfunction phenomenon | Do not vacuum | |
troubleshooting | 1. Check the filter holder, and dry it if it is wet. 2. Check the main brush, if the foreign objects are entangled or stuck, please clean it. 3. Turn on the robot to detect the wind power of the air outlet and the rotation frequency of the main brush. | |
Maintenance Plan | 1.Disassemble the robot to check the fan wires, if it is broken or damaged, please replace the it. 2.Disassemble the robot to check the main brush motor wires. If it is broken or damaged, replace the main brush motor. 3.Use a multimeter to measure the resistance and fuse corresponding to the main brush motor and fan on the mainboard. 4.Replace the mainboard to test. | |